Segway Power Station Cube Error Code E13

From Joey's Wiki
Revision as of 00:56, 24 February 2024 by Joeybab3 (talk | contribs) (Created page with " "AC output short-circuit protection" {{Segway Power Station Cube Error Code SEO|13}} ==Cause== This error means there's a short circuit in your AC output connections or one of the devices connected to the AC outlets. ==Fix== Disconnect the loads. Turn off the AC output after 5 seconds and try again later. * Disconnect all the AC devices. * Check your wiring and the devices themselves for any signs of damage or short circuits. * Once the source of the short is fix...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search 
"AC output short-circuit protection"

If your Segway Power Station Cube is beeping or has a red wrench icon and flashes this code, read below.

If you clicked the wrong error code, go back to the Power Station Cube Error Code Index.

Previous Error Code: Segway Power Station Cube Error Code E12 - Next Error Code: Segway Power Station Cube Error Code E14

Cause

This error means there's a short circuit in your AC output connections or one of the devices connected to the AC outlets.

Fix

Disconnect the loads. Turn off the AC output after 5 seconds and try again later.
  • Disconnect all the AC devices.
  • Check your wiring and the devices themselves for any signs of damage or short circuits.
  • Once the source of the short is fixed, turn off the AC output, wait for 5 seconds, and try again.
Retrieved from "https://joeybabcock.me/wiki/index.php?title=Segway_Power_Station_Cube_Error_Code_E13&oldid=2647"