Segway Power Station Cube Error Code E08

From Joey's Wiki
Revision as of 00:40, 24 February 2024 by Joeybab3 (talk | contribs) (Created page with " "Solar charging abnormality" {{Segway Power Station Cube Error Code SEO|8}} ==Cause== This error is likely caused by an abnormal reading when charging using the solar panel. ==Fix== 1. Check the solar panel type (80V/20A). If matched, the hardware circuit of the solar panel might have been damaged, please contact the after-sales service for support. 2. If not, please disconnect the solar panel. Make sure the unit has enough airflow during operation and nothing i...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search 
"Solar charging abnormality"

If your Segway Power Station Cube is beeping or has a red wrench icon and flashes this code, read below.

If you clicked the wrong error code, go back to the Power Station Cube Error Code Index.

Previous Error Code: Segway Power Station Cube Error Code E07 - Next Error Code: Segway Power Station Cube Error Code E09

Cause

This error is likely caused by an abnormal reading when charging using the solar panel.

Fix

1. Check the solar panel type (80V/20A). If matched, the hardware circuit of the solar panel might have been damaged, please contact the after-sales service for support.
2. If not, please disconnect the solar panel.

Make sure the unit has enough airflow during operation and nothing is obstructing the vents.

Retrieved from "https://joeybabcock.me/wiki/index.php?title=Segway_Power_Station_Cube_Error_Code_E08&oldid=2636"