Segway Power Station Cube Error Code E07

From Joey's Wiki
Revision as of 00:38, 24 February 2024 by Joeybab3 (talk | contribs) (Created page with " "Over temperature protection during discharging" {{Segway Power Station Cube Error Code SEO|7}} ==Cause== This error can be triggered when the temperature passes the rated threshold of 113f/45c while the unit is powering an external load. ==Fix== 1. Please cool down the power station. 2. Check the fan and cooling vents, and apply heat dissipation for the power station. Make sure the unit has enough airflow during operation and nothing is obstructing the vents....")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search 
"Over temperature protection during discharging"

If your Segway Power Station Cube is beeping or has a red wrench icon and flashes this code, read below.

If you clicked the wrong error code, go back to the Power Station Cube Error Code Index.

Previous Error Code: Segway Power Station Cube Error Code E06 - Next Error Code: Segway Power Station Cube Error Code E08

Cause

This error can be triggered when the temperature passes the rated threshold of 113f/45c while the unit is powering an external load.

Fix

1. Please cool down the power station.
2. Check the fan and cooling vents, and apply heat dissipation for the power station.

Make sure the unit has enough airflow during operation and nothing is obstructing the vents.

Retrieved from "https://joeybabcock.me/wiki/index.php?title=Segway_Power_Station_Cube_Error_Code_E07&oldid=2634"