Ninebot NEB1002-H1: Difference between revisions
Jump to navigation
Jump to search
(Created page with "The '''Ninebot NEB1002-H1''' is the optional external battery intended for the Ninebot ES3/ES3 Plus and Ninebot ES4 scooters. thumb|400px|center|The Ninebot NEB1002-H1 via Segway[https://b2b.segway.com/segway-battery-pack/]. It runs on the same firmware and pack layout as the internal battery, the Ninebot NEB1002-H. ==Specs== Original specs [https://b2b.segway.com/segway-battery-pack/ via Segway]. {| class="wikit...") |
No edit summary |
||
| (6 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
The '''Ninebot NEB1002-H1''' is the optional external battery intended for the [[Ninebot ES3|Ninebot ES3/ES3 Plus]] and [[Ninebot ES4]] scooters. | The '''Ninebot NEB1002-H1''' is the optional external battery intended for the [[Ninebot ES3|Ninebot ES3/ES3 Plus]] and [[Ninebot ES4]] scooters. | ||
[[File:NinebotNEB1002- | For other models, visit [[Battery Models]]. | ||
[[File:NinebotNEB1002-H1.png|thumb|400px|center|The Ninebot NEB1002-H1 via Segway[https://store.segway.com/ninebot-by-segway-kickscooter-external-battery-pack].]] | |||
It runs on the same firmware and pack layout as the internal battery, the [[Ninebot NEB1002-H]]. | It runs on the same firmware and pack layout as the internal battery, the [[Ninebot NEB1002-H]]. | ||
| Line 40: | Line 42: | ||
This battery is based on the STM8 family of MCU and is compatible with standard ESX BMS Firmware. | This battery is based on the STM8 family of MCU and is compatible with standard ESX BMS Firmware. | ||
The specific chip is the '''STM8L151K6T6'''. | |||
You can find more info about this firmware by viewing the [https://joeybabcock.me/wiki/Ninebot_ESX_Firmware#BMS_Firmware Ninebot ESX STM8 BMS Firmware Index]. | You can find more info about this firmware by viewing the [https://joeybabcock.me/wiki/Ninebot_ESX_Firmware#BMS_Firmware Ninebot ESX STM8 BMS Firmware Index]. | ||
*[[Ninebot ESX BMS 1.2.2]] | |||
*[[Ninebot ESX BMS 1.2.5]] | |||
*[[Ninebot ESX BMS 1.3.6]] | |||
*[[Ninebot ESX BMS 1.4.1]] | |||
*[[Ninebot ESX BMS 1.4.6]] | |||
*[[Ninebot ESX BMS 1.4.9]] | |||
*[[Ninebot ESX BMS 1.5.8]] | |||
*[[Ninebot ESX BMS 1.6.0]] | |||
==Manual== | |||
*[[File:NinebotNEB1002-H1Manual.pdf]] | |||
[[Category: Scooters]][[Category: Ninebot]][[Category: Battery]] | [[Category: Scooters]][[Category: Ninebot]][[Category: Battery]] | ||
![thumb|400px|center|The Ninebot NEB1002-H1 via Segway[https://b2b.segway.com/segway-battery-pack/].](/wiki/index.php?title=File:NinebotNEB1002-H.png&action=edit&redlink=1){kind=link}
Latest revision as of 17:57, 11 May 2024
The Ninebot NEB1002-H1 is the optional external battery intended for the Ninebot ES3/ES3 Plus and Ninebot ES4 scooters.
For other models, visit Battery Models.
It runs on the same firmware and pack layout as the internal battery, the Ninebot NEB1002-H.
Specs
Original specs via Segway.
| Rated Capacity | 5.2Ah/5200mAh |
| Rated Power | 187Wh |
| Battery Voltage | 36 VDC |
| Charging Voltage | 42 VDC |
| Charging Temperature | 32–104°F (0–40°C) |
| Range* | 25km |
| Cells Used | EVE / FAR EAST |
| Cell Size | 18650 |
BMS Firmware
This battery is based on the STM8 family of MCU and is compatible with standard ESX BMS Firmware.
The specific chip is the STM8L151K6T6.
You can find more info about this firmware by viewing the Ninebot ESX STM8 BMS Firmware Index.
- Ninebot ESX BMS 1.2.2
- Ninebot ESX BMS 1.2.5
- Ninebot ESX BMS 1.3.6
- Ninebot ESX BMS 1.4.1
- Ninebot ESX BMS 1.4.6
- Ninebot ESX BMS 1.4.9
- Ninebot ESX BMS 1.5.8
- Ninebot ESX BMS 1.6.0